* string functions mstr*() are moved to string_utils.c
* allocation wrappers are moved to utils.h
* printf_* functions are moved to log.h
Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com>
This reverts commit 50e2259404.
Temporarily revert the removal until we have more information about this whole
thing.
Turns out a couple of drivers don't work properly without the sync fence,
including intel, llvmpipe and NVIDIA.
Although sync fence is needed, from the information I have gathered (looking
at old bug reports, protocol specifications, look at other compositors' code),
compton's usage of it is not proper. So we need to rewrite it in the future,
after we get more information from driver developers.
Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com>
This was a dubious "fix" for a Nvidia driver problem. The problem was
never fully understood, and the then developers took a shotgun approach
and implemented xsync fences as a fix. Which somehow fixed the problem.
Again, I don't see any indication that the developers understood why
this "fix" worked.
(for details, see chjj/compton#152 and chjj/compton#181)
The driver problem should have been fixed almost 5 years ago. So this
shouldn't be needed anymore. In addition the way compton uses xsync fences
is apparently wrong according to the xsync spec (fences are attached to
screen, but compton uses them as if they were attached to drawables).
So, I will try removing it and see if anyone will complain. If there are
real concrete reasons why fences are needed, it will be brought back.
Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com>
IANAL, but I think I am allowed to add missing copyright notices for
someone else. And I did my best job using git history to figure out who
wrote which functions. So I hope everything is fine.
Re-did the painting logic, and document it.
It is unclear to me what is the previous painting logic. But the current
one is basically this:
1. Go through all windows top to bottom, and put visible windows (not
unmapped, opacity > 0, etc) into a linked list, from bottom to top
2. Accumulate a region of ignore on each window, which is basically the
region of screen that is obscured by all the windows above current
one.
3. Paint all the visible windows from bottom to top. Subtract the region
of ignore from the painting region. If we need to paint shadow, we
subtract the body of the window from the shadow painting region too,
because we don't want shadow behind the window.
4. region of ignore is invalidated when window stack change, an
window on top moved or changed shape, when window changed between
opaque and transparent, etc.
Notes:
It is unclear whether all the different shapes of a window (extents,
noframe, border, bounding shape, etc) are calculated correctly or not.
It is unclear if window shape related events are handled correctly or
not. Need more testing.
Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com>
Also remove some debug function calls (there are better tools for opengl
debugging now). Also remove copysubbuffermesa
Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com>
- Add glx_take_screenshot() for taking a screenshot. With ImageMagick
the output data could be viewed in this way:
display -size [SCREEN-WIDTH]x[SCREEN-HEIGHT] -depth 8 -flip
rgb:[PATH]
(#204)
- Add D-Bus command `opts_get string:paint_on_overlay_id` to get X
Composite overlay window ID. (#204)
- Code cleanup.
- Separate GLX parts from session_t into glx_session_t.
- Add --rererdir-on-root-change and --glx-reinit-on-root-change, as
possible solutions for #217. Thanks to jlindgren90 for reporting.
- Add --glx-fshader-win, which specifies a custom fragment shader for
painting windows. compton-default-fshader-win.glsl is the shader with
default behavior, and compton-fake-transparency-fshader-win.glsl
provides a template of fake transparency. (#183)
- Add --force-win-blend to force all windows to be painted with
blending.
- Add --no-fading-destroyed-argb, as a workaround of bugs in some WMs.
(#193)
- Add --xrender-sync{,-fence} to deal with redraw lag issue on GLX
backend. --xrender-sync-fence requires a sufficiently new xorg-server
and libXext. NO_XSYNC=1 may be used to disable it at compile time.
Thanks to tchebb for reporting and everybody else for testing. (#181)
- A bit code clean-up. Replace a few XSync() with XFlush() to minimize
the latency.
- Add new backend "xr_glx_hybird", which uses X Render for all
compositing but GLX on the last step of rendering to screen. This
makes GLX-backend-specific VSync methods usable while may avoid
certain bugs with GLX backend. The idea comes from ali1234.
Experimental.
- GLX backend: Stop using or rendering to depth buffer.
- Use glFinish() instead of glFlush() before VSync. It probably uses
more CPU but could be more reliable than glFlush().
- Fix OpenGL 3.0 compatibility by changing glFramebufferTexture() to
glFramebufferTexture2D(). Thanks to danfe for suggestion!
- Add notification about DocBook toolchina dependencies. Thanks to
danfe. (#121)
- Add multipass blur support. Note GLX Framebuffer support is required.
My benchmark shows multipass blur brings 5% performance boost for X
Render backend (3x3box). On GLX backend it brings 10% performance
boost for 5x5box but negatively affects performance for 3x3box. Thanks
to jrfonseca for advice. (#107)
- GLX backend: Cache blur texture for each window, for a 12% performance
boost.
- Add D-Bus fading control. Thanks to yulan6248 for testing. (#112)
- Fix FAQ link in README.md. Thanks to lorenzos for report. (#111)
- Correctly deinitialize VSync on on-the-fly VSync method switch.
- X Render backend: Normalize blur kernel.
- Code clean-up.
- Known issue: Linear corruption on border of a window may appear with X
Render multi-pass blur. Possible to fix but probably not worthwhile.
- GLX backend: Add DEBUG_GLX_MARK, to add GL marks around functions with
glStringMarkerGREMEDY(), and mark frame termination with
glFrameTerminatorGREMEDY().
- Print output of `compton -h` to stdout. (#110)
- GLX backend: Strip out elements with factor 0 in GLSL blur code.
Thanks to jrfonseca for guides. (#107)
- Fix GL_TEXTURE_RECTANGLE support. Thanks to amonakov for guides.
(#107)
- Enhance --glx-copy-from-front to improve performance and make it work
with --glx-swap-method, copied from kwin patch. Thanks to bwat47 for
info. (#107)
- Add texture2Doffset() support in blur GLSL shader. Thanks to amonakov
for advice. No visible benefit here, though. (#107)
- Only limited tests are done and I'm super sleepy. Bugs expected
- Fix --resize-damage. I forgot to shrink the painting region back when
actually copying to destination.
- Include extra pixels around the blur texture to avoid some possible
small issues, if --resize-damage is positive.
- Known issue: Line artifacts may still appear with --dbe (X Render
backend) or --glx-swap-method (GLX backend). I doubt if there's way to
fix this without very inefficient mechanisms.
- Add --resize-damage to enlarge/shrink repaint region by a specific
number of pixels, used for solving the line corruption issue with
blur. Thanks to Nuck and jerri in #104 for reporting.
- Fix the memory leak of blur shader string.
- Add blur convolution kernel customization, --blur-kern. The format is
a bit tricky so be sure to read the description in `compton -h`. Not
much tests received.
- GLX backend: Tolerate missing GLSL uniforms for strangely shaped
convolution kernel.
- Fix a memory leak that blur-background blacklist is not freed.
- GLX backend: Add --glx-swap-method, to reduce painting region if the
driver uses exchange or copy buffer swaps. Untested.
- Add --fade-exclude, to disable fading on specific windows based on
some conditions. Untested.
- Expose GLX backend options through configuration file. Add fetching of
GLX backend options through D-Bus.
- Use NULL pointer instead of element count to delimit string arrays in
parse_vsync()/parse_backend()/parse_glx_swap_method().
- Add documentation about "wintypes" section in configuration file.
- GLX backend: Fix broken dim and blur with --glx-no-stencil when
dealing with shaped windows.
- GLX backend: Cache region contents and do a local region intersection
instead of using XFixesIntersectRegion(). Drastic reduction in CPU
usage for --glx-no-stencil. Now --glx-no-stencil substantially
outperforms (~15%) normal mode.
- Use macros to reuse paint-in-region code in opengl.c . Add new type
"reg_data_t" to store XserverRegion cache.
- Cache region contents in is_region_empty(), mostly useful only for GLX
backend to save one roundtrip to X.
- GLX backend: Add --glx-no-rebind-pixmap, which prevents rebinding of
GLX texture to pixmap on content change. It doesn't work on some
drivers, but it saves some CPU on those where it does.
- Wrap XFree() with a new function cxfree() since its man page claims
NULL pointers are not acceptable (although in fact it does...).
- Use macro to save some code in get_cfg(). Code clean-up.
- GLX backend: Fix broken --inactive-dim.
- GLX backend: Fix bugs when inverting colors of windows. Thanks to
madsy and neure for help.
- GLX backend: Lift `glx_no_stencil` restriction from glx_init_blur().
It still probably won't work, but the user can try.
- XRender backend: Use XRenderFillRectangles() instead of
XRenderComposite() to do dimming.
- GLX backend: Add --glx-use-copysubbuffermesa, to use
MESA_copy_sub_buffer to do partial screen update. Huge performance
boost on mesa drivers for partial screen updates, but does not work
for nvidia-drivers and may break VSync. Automagically overrides
--glx-copy-from-front.
- Add rect_is_fullscreen() to reuse code. Misc changes.
- GLX backend: Add blur background support using a GLSL shader. Only
tested with nvidia-drivers-313.26. Known to cause quite some decrease
in performance (~10%?).
- Detach shaders in glx_create_program(). Misc changes.
