Before becoming the selection owner for _NET_WM_CM_Sn, compton will now check if
that selection is already owned (which means that another composite manager is
already running). If this check fails, startup will be refused. This behaviour
is required by EWMH / ICCCM.
Because this should catch all composite managers, the error message that was
used before when another manager is already running is reworded to mention that
the other manager does not follow EWMH.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Under extreme race conditions (window A close at the same time as window
B create), there can be multiple windows with same id in compton's window
list. If at this point window B closes itself as well, finish_destroy_win
might destroy a different window as what's passed to destroy_callback.
This can be a problem because someone can still hold a reference to that
window (e.g. 't' in paint_preprocess), and there's no way to clear that
reference. If finish_destroy_win always destroy the same window passed
to destroy_callback, this will not be a problem.
- Remove the const function attribute from get_time_*(), since the
functions they call that actually get the time probably access global
variables or have other behaviors unacceptable for const functions.
- Change the const function attribute on win_has_frame() to pure, as it
accesses memory its parameter points to, which is invalid for a const
function.
Bug fix: Select the larger of the X window border width and
_NET_FRAME_EXTENTS, instead of adding them together, when determining
the frame extents. (Supposedly) more EWMH compliant, as EWMH
_NET_FRAME_EXTENTS should include the X window border width already. We
did not choose to completely rely on _NET_FRAME_EXTENTS to remove the
need to keep track of whether there is a _NET_FRAME_EXTENTS, and
(hopefully) take care of some cases when it is wrong. The commit should
fix awesomeWM/awesome#425. Thanks to psychon for the information. (#302)
The commit fixes the bug in win_get_region_noframe() that the X window
border width is not considered when determining the width/height of the
window without frame, as well.
- Add margin_t, a structure that represents margins around a rectangle.
- Store frame extents of a window with margin_t, replacing the 4
fields ({left,right,top,bottom}_width) in struct _win.
- Add two helper macros, cmemzero() and cmemzero_one(), that zero out a
block of memory.
Fix the bug that --active-opacity state does not change
on `--focus-exclude`-ed windows correctly, since win_update_focused()
enables the WFLAG_OPCT_CHANGE flag on a window only if w->focused
changes, while --active-opacity depends on the output of
win_is_focused_real() instead of w->focused, which could be changed even
if w->focused does not change (e.g. when the window is
`--focus-exclude`-ed).
Always redirect std{out,err} if --logpath is specified, instead of only
redirect after fork, to correct the inconsistent behavior of --logpath
when getppid() returns 1. (#263)
- Add disabled-at-compile-time note in usage text with NO_LIBCONFIG.
- Fix the incorrect disabled-at-compile-time note for --backend.
- Move position of the disabled-at-compile-time note of --dbus
slightly.
- Fix the bug that --no-fading-openclose doesn not work when fading out
by writing w->fade_last as well in win_determine_fade().
- Write w->fade_last for applying w->fade_force, as well.
- Reformat usage text by adding a blank line between descriptions of
two switches. (#215)
- Update documentation for a bit. Correct some wrong statements and
clarify some others.
- Add glx_take_screenshot() for taking a screenshot. With ImageMagick
the output data could be viewed in this way:
display -size [SCREEN-WIDTH]x[SCREEN-HEIGHT] -depth 8 -flip
rgb:[PATH]
(#204)
- Add D-Bus command `opts_get string:paint_on_overlay_id` to get X
Composite overlay window ID. (#204)
- Code cleanup.
- Separate GLX parts from session_t into glx_session_t.
- Add --rererdir-on-root-change and --glx-reinit-on-root-change, as
possible solutions for #217. Thanks to jlindgren90 for reporting.
- Add --glx-fshader-win, which specifies a custom fragment shader for
painting windows. compton-default-fshader-win.glsl is the shader with
default behavior, and compton-fake-transparency-fshader-win.glsl
provides a template of fake transparency. (#183)
- Add --force-win-blend to force all windows to be painted with
blending.
- Add --no-fading-destroyed-argb, as a workaround of bugs in some WMs.
(#193)
Add `bounding_shape` and `rounded_corners` as condition match target.
Deprecate --shadow-ignore-shaped. Add rounded-corners detection to
win_is_fullscreen(). Slightly modify win_rounded_corners() logic. Thanks
to tdryer for reporting. (#191)
- Try to avoid evaluating conditions after window unmap/destruction.
Unfortunately, frequently this doesn't work due to the asynchronous
nature of X.
- Add _GTK_FRAME_EXTENTS exclusion rules to compton.sample.conf. Thanks
to memeplex, hexchain, and others for info. (#189)
- Add debugging option --show-all-xerrors, and other debugging changes.
Doc update.
- Add --xrender-sync{,-fence} to deal with redraw lag issue on GLX
backend. --xrender-sync-fence requires a sufficiently new xorg-server
and libXext. NO_XSYNC=1 may be used to disable it at compile time.
Thanks to tchebb for reporting and everybody else for testing. (#181)
- A bit code clean-up. Replace a few XSync() with XFlush() to minimize
the latency.
- Add "xr-glx-hybrid" as an alias of "xr_glx_hybrid". (#163)
- Clear damage history in expose_root() and when root window size
changes. Unfortunately this doesn't fix#181.
- Add new backend "xr_glx_hybird", which uses X Render for all
compositing but GLX on the last step of rendering to screen. This
makes GLX-backend-specific VSync methods usable while may avoid
certain bugs with GLX backend. The idea comes from ali1234.
Experimental.
- GLX backend: Stop using or rendering to depth buffer.
- Use glFinish() instead of glFlush() before VSync. It probably uses
more CPU but could be more reliable than glFlush().
- Add --write-pid-path to write process ID to a file, to help
determining compton's process ID when -b is used.
- Add a few extra targets to query through D-Bus opts_get (version, pid,
etc.) and through win_get, primarily for debugging.
- Add helper macros likely(), unlikely(), cmalloc(), ccalloc(),
crealloc().
- Change w->opacity_set to opacity_t. Determine display_repr in
session_init(), etc.
Possible fix for a very rare timing issue in focus detection. Compton
may fail to detect the currently focused window, when a window newly
mapped gets focused, we failed to listen to events and get FocusIn from
it in time, and a series of focus change events before it happens stay
in the event queue and puzzled compton. My choice is to force focus
recheck on all focus-related events. More roundtrips to X, but not
necessarily worse performance, due to the high cost of focus flipping
especially when there's a lot of conditions. Thanks to SlackBox for
reporting. (#153)
- Fix a bug that --opacity-rule misbehaves with a value higher than 50%
on 32-bit systems. Thanks to mrinx for reporting. (#149)
- Fix a bug that opacity-rule in configuration file does not work.
- Rewrite focus detection logic. Remove w->focused_real and use
ps->active_win to identify focused window uniformly. Use a more
expensive way to filter FocusIn/Out events to improve reliability.
Only limited tests are done, and bugs are likely to be introduced.
(#99)
- Known issue: Under fvwm, compton sometimes does not consistently
report the window input gets sent to. But there's something wrong in
that case: XGetInputFocus() shows the root window is focused but
another window is receiving input.
- Possible fix for high CPU usage with a low --unredir-possible-delay.
Thanks to Feltzer for reporting. (#140)
- Rewrite some parts to (hopefully) increase performance, especially
with --unredir-if-possible.
- Known issue: With GTX 670 and x11-drivers/nvidia-drivers-325.15, and
compton --unredir-if-possible --config /dev/null, if you send a
SIGUSR1 to compton when a full-screen solid window is there, in which
case compton either redirects then immediately unredirects the screen,
or just don't redirect it altogether, X freezes after compton
unredirects the screen. Requests sent by other X clients are not
responded until compton is killed, which indicates the possibility of
a bug in X. Attaching to X process shows X is on ./os/waitFor.c.
Backend does not matter. --paint-on-overlay fixes the issue somehow.
compton-git-v0.1_beta1-5-g4600f43-2013-08-28 doesn't exhibit the
issue, but it's probably timing-related.
- Add --unredir-if-possible-exclude, to exclude certain windows when
evaluating --unredir-if-possible. (#140)
- Add --unredir-if-possible-delay, to add some delay before
unredirecting screen. (#138, #140)
- Code clean-up.
- Add stoppaint_force option, controlled via D-Bus, to stop painting
completely, which may look better than unredirecting the screen,
sometimes. (#41)
- Add x2, y2 matching targets.
- Update documentation.
- Fix OpenGL 3.0 compatibility by changing glFramebufferTexture() to
glFramebufferTexture2D(). Thanks to danfe for suggestion!
- Add notification about DocBook toolchina dependencies. Thanks to
danfe. (#121)
- Add --paint-exclude to prevent certain windows from being painted, for
debugging purposes.
- Add predefined matching target "x", "y", "width", "height", "widthb",
"heightb", "border_width", and "fullscreen".
- Fix bug #119, wrong man page install dir in CMake configuration.
Thanks to sstewartgallus for reporting.
- Add --shadow-exclude-reg, which excludes certain regions on the screen
to have shadows painted in. (#116)
- Adjust session initialization order. Now X root and screen info and
basic X extensions are available in configuration parsing step.
- Add --opacity-rule, which sets opacity based on conditions, as
requested by zabbal. (#113)
- Add a data field for each condition.
- Correct the FAQ link in README.md. Silly me.
- Code clean-up.
- Add multipass blur support. Note GLX Framebuffer support is required.
My benchmark shows multipass blur brings 5% performance boost for X
Render backend (3x3box). On GLX backend it brings 10% performance
boost for 5x5box but negatively affects performance for 3x3box. Thanks
to jrfonseca for advice. (#107)
- GLX backend: Cache blur texture for each window, for a 12% performance
boost.
- Add D-Bus fading control. Thanks to yulan6248 for testing. (#112)
- Fix FAQ link in README.md. Thanks to lorenzos for report. (#111)
- Correctly deinitialize VSync on on-the-fly VSync method switch.
- X Render backend: Normalize blur kernel.
- Code clean-up.
- Known issue: Linear corruption on border of a window may appear with X
Render multi-pass blur. Possible to fix but probably not worthwhile.
- GLX backend: Add DEBUG_GLX_MARK, to add GL marks around functions with
glStringMarkerGREMEDY(), and mark frame termination with
glFrameTerminatorGREMEDY().
- Print output of `compton -h` to stdout. (#110)
- GLX backend: Strip out elements with factor 0 in GLSL blur code.
Thanks to jrfonseca for guides. (#107)
- Fix GL_TEXTURE_RECTANGLE support. Thanks to amonakov for guides.
(#107)
- Enhance --glx-copy-from-front to improve performance and make it work
with --glx-swap-method, copied from kwin patch. Thanks to bwat47 for
info. (#107)
- Add texture2Doffset() support in blur GLSL shader. Thanks to amonakov
for advice. No visible benefit here, though. (#107)
- Only limited tests are done and I'm super sleepy. Bugs expected
- Fix --resize-damage. I forgot to shrink the painting region back when
actually copying to destination.
- Include extra pixels around the blur texture to avoid some possible
small issues, if --resize-damage is positive.
- Known issue: Line artifacts may still appear with --dbe (X Render
backend) or --glx-swap-method (GLX backend). I doubt if there's way to
fix this without very inefficient mechanisms.
- Add --resize-damage to enlarge/shrink repaint region by a specific
number of pixels, used for solving the line corruption issue with
blur. Thanks to Nuck and jerri in #104 for reporting.
- Fix the memory leak of blur shader string.
- Add blur convolution kernel customization, --blur-kern. The format is
a bit tricky so be sure to read the description in `compton -h`. Not
much tests received.
- GLX backend: Tolerate missing GLSL uniforms for strangely shaped
convolution kernel.
- Fix a memory leak that blur-background blacklist is not freed.
- GLX backend: Add --glx-swap-method, to reduce painting region if the
driver uses exchange or copy buffer swaps. Untested.
- Add --fade-exclude, to disable fading on specific windows based on
some conditions. Untested.
- Expose GLX backend options through configuration file. Add fetching of
GLX backend options through D-Bus.
- Use NULL pointer instead of element count to delimit string arrays in
parse_vsync()/parse_backend()/parse_glx_swap_method().
- Add documentation about "wintypes" section in configuration file.
- GLX backend: Fix broken dim and blur with --glx-no-stencil when
dealing with shaped windows.
- GLX backend: Cache region contents and do a local region intersection
instead of using XFixesIntersectRegion(). Drastic reduction in CPU
usage for --glx-no-stencil. Now --glx-no-stencil substantially
outperforms (~15%) normal mode.
- Use macros to reuse paint-in-region code in opengl.c . Add new type
"reg_data_t" to store XserverRegion cache.
- Cache region contents in is_region_empty(), mostly useful only for GLX
backend to save one roundtrip to X.
- GLX backend: Add --glx-no-rebind-pixmap, which prevents rebinding of
GLX texture to pixmap on content change. It doesn't work on some
drivers, but it saves some CPU on those where it does.
- Wrap XFree() with a new function cxfree() since its man page claims
NULL pointers are not acceptable (although in fact it does...).
- Use macro to save some code in get_cfg(). Code clean-up.