- Add --xrender-sync{,-fence} to deal with redraw lag issue on GLX
backend. --xrender-sync-fence requires a sufficiently new xorg-server
and libXext. NO_XSYNC=1 may be used to disable it at compile time.
Thanks to tchebb for reporting and everybody else for testing. (#181)
- A bit code clean-up. Replace a few XSync() with XFlush() to minimize
the latency.
Possible fix for a very rare timing issue in focus detection. Compton
may fail to detect the currently focused window, when a window newly
mapped gets focused, we failed to listen to events and get FocusIn from
it in time, and a series of focus change events before it happens stay
in the event queue and puzzled compton. My choice is to force focus
recheck on all focus-related events. More roundtrips to X, but not
necessarily worse performance, due to the high cost of focus flipping
especially when there's a lot of conditions. Thanks to SlackBox for
reporting. (#153)
- Add multipass blur support. Note GLX Framebuffer support is required.
My benchmark shows multipass blur brings 5% performance boost for X
Render backend (3x3box). On GLX backend it brings 10% performance
boost for 5x5box but negatively affects performance for 3x3box. Thanks
to jrfonseca for advice. (#107)
- GLX backend: Cache blur texture for each window, for a 12% performance
boost.
- Add D-Bus fading control. Thanks to yulan6248 for testing. (#112)
- Fix FAQ link in README.md. Thanks to lorenzos for report. (#111)
- Correctly deinitialize VSync on on-the-fly VSync method switch.
- X Render backend: Normalize blur kernel.
- Code clean-up.
- Known issue: Linear corruption on border of a window may appear with X
Render multi-pass blur. Possible to fix but probably not worthwhile.
- Add blur convolution kernel customization, --blur-kern. The format is
a bit tricky so be sure to read the description in `compton -h`. Not
much tests received.
- GLX backend: Tolerate missing GLSL uniforms for strangely shaped
convolution kernel.
- Fix a memory leak that blur-background blacklist is not freed.
- GLX backend: Add blur background support using a GLSL shader. Only
tested with nvidia-drivers-313.26. Known to cause quite some decrease
in performance (~10%?).
- Detach shaders in glx_create_program(). Misc changes.
- GLX backend: Use GL_SCISSOR_TEST instead of STENCIL_TEST if there's
only one rectangle in glx_set_clip(). Profiling with gDebugger shows a
10% performance improvement.
- Add .desktop installation rules. (#97)
- Fix a bug that glx_bind_pixmap() doesn't work with mesa drivers.
Thanks to Janhouse and mkraemer for reporting. (#7)
- Use stencil buffer to attempt to eliminate potential double-paint
issue in glx_render(). X Fixes doesn't guarantee the rectangles in a
region do not overlap, and this may cause some regions to be painted
twice, which would be a problem if we are painting transparent things.
Now the target window must have a stencil buffer. Compiz uses its own
region implementation to deal with this, but as a lightweight
compositor we can't really do the same. It may have a positive or
negative effort over performance. Callgrind result indicates basically
no change in performance, but this may or may not be true.
- Correctly distinguish GL extensions and GLX extensions. Sorry. :-D
- Handle screen size. Thanks to tsmithe for reporting. (#7)
- Rename OpenGL backend to GLX backend, because, we might have a EGL
backend someday.
- Add configuration file option `backend` to specify backend. Add
`backend` to D-Bus `opts_get`.
- Add OpenGL shader compilation code, but currently unused.
- Minor adjustments.
- Known issue: Window content doesn't get updated in VirtualBox,
probably because its OpenGL implementation requires constant rebinding
of texture. But that's really slow...
- Known issue: Blur feature is still unimplemented in GLX backend.
- Add experimental OpenGL backend (--opengl). --blur-background is
currently not possible with this backend, because I'm still trying to
find a proper way to do blur with OpenGL. Flipping backend on-the-fly
is really hard, so it isn't supported right now. No configuration file
option exists to enable this, because it isn't stable enough.
- Add `opengl-swc` VSync method that uses SGI_swap_control to control
buffer swap, with OpenGL backend. (#7)
- Fix a potential read-from-freed-memory issue in paint_all().
- Correctly reattach GLX context after fork.
- Dump error text in error(). Add GLX error code handling.
- Code clean-up.
- Known issues: Region operations take a lot of time in glx_render().
I'm hesitating about what to do.
- #91: Use pkg-config to find drm.h to avoid issues on FreeBSD. Thanks
to hun7err for pointing out and providing patch.
- #89: Add default shadow exclusion rule for notify-osd. Thanks to
DanielRS.
- Check for abundant positional arguments.
- Use paint target window (root window / overlay window) instead of
ps->reg_win to create GLXContext. (May have negative effects on OpenGL
VSync.) Add new OpenGL helpers functions, to prepare for the new
OpenGL backend.
- Dump more info of a PropertyNotify with DEBUG_EVENTS.
- Make Makefile compatible with BSD install, by dropping -D.
- Make CFG independent in Makefile, to allow people to specify CFLAGS
as a parameter to make.
- Correct location of .clang_complete.
- Add on-the-fly VSync option modification via D-Bus, as requested by
kunitoki (#80). Expose parse_vsync(), create vsync_init() and
ensure_glx_context().
- Change default value of ps->drm_fd to -1.
- Update Makefile. Change the install/uninstall rules and add doc
installation, requested by hasufell in #85.
- Mark window not damaged in map_win(). It helps in reducing flickering
with inverted window color, but I'm not completely sure if it's safe.
- Avoid modifying w->invert_color when window is unmapped.
- Update documentation. Thanks to hasufell for pointing out.
- Add "vsync-oml" VSync method, using GLX_OML_sync_control. Untested,
because it's not supported by my driver.
- Unredirect ps->reg_win, because DRI wiki says it's related to the
behavior of OpenGL VSync extensions.
- Add glFlush() and glXWaitX() calls, in hope they are slightly helpful
for VSync.
- Change a few functions to make error handling more graceful. Make some
errors fatal. Code clean-up.
- Add unused function make_text_prop().
- Add advanced window matching system, capable of matching against
arbitrary window properties as well as a series of internal
properties, with 4 additional operators (>, <, >=, <=) useful for
integer targets, and support of logical operators. The old matching
system is removed, but compatibility with the format is retained.
- As the new matching system is pretty complicated, and I have no past
experience in writing a parser, it's pretty possible that bugs are
present. It also has inferior performance, but I hope it doesn't
matter on modern CPUs.
- It's possible to disable matching system at compile time with NO_C2=1
now.
- Add ps->o.config_file to track which config file we have actually
read. Queryable via D-Bus.
- Parse -d in first pass in get_cfg() as c2 needs to query X to get
atoms during condition parsing.
- Fix a bug in wid_get_prop_adv() that 0 == rformat is not handled
correctly.
- Fix incompatibility with FreeBSD sed in dbus-examples/cdbus-driver.sh
.
- Add recipe to generate .clang_complete in Makefile, used by Vim
clang_complete plugin.
- Add DEBUG_C2 for debugging condition string parsing. DEBUG_WINMATCH is
still used for match debugging.
- Rename win_on_wdata_change() to win_on_factor_change().
- Extra malloc() failure checks. Add const to matching cache members in
session_t. Code clean-up. Documentation update.
- Fix a bug that root window is not repainted on wallpaper change unless
an Expose X event is received. Seemingly, if there's no mapped window
on a screen, X will not send an Expose event when the wallpaper
changes. Thanks to baskerville for reporting.
- Fix a X Pixmap leak when there's no existing wallpaper pixmap found.
- Fix a bug in mstrncpy() that null character is not added to the end of
the copied string.
- Make VSYNC_STRS public, for use in src/dbus.c. Adjust the type of
WINTYPES array. Add NUM_VSYNC.
- Add more targets for various D-Bus methods. Add "bad_target" D-Bus
error. Improve error handling. Add more helper functions to append
arguments to a D-Bus message. Add Introspect method to D-Bus
introspection reply.
- Add public declarations of things in the new condition format code to
common.h. Move definitions of some inline functions from compton.h to
common.h. Make some functions public. Move wid_get_prop_adv() to
compton.c. The primary code files of the new format src/c2.{c,h} will
be published when ready.
- Add support for dumping version string in Makefile (make version), to
make snapshot generation easier.
- Add repeated inclusion protection to common.h.
- Update documentation.
- Use gsed instead of sed in dbus-examples/cdbus-driver.sh if possible,
as some BSD systems does not come with GNU sed by default. Thanks to
DaChiChang for reporting.
- Code clean-up. Small type changes in register_cm() to silence
warnings. Quit on failure in parse_vsync(). Apply stricter checks in
force_repaint().
- Add D-Bus support. Currently 7 methods are available: "reset" (same as
SIGUSR1), "list_win" (list the windows compton manages), "win_get"
(get a property of the window), "win_set" (set a property of the
window), "find_win" (find window based on client window / focus),
"opts_get" (get the value of a compton option), and "opts_set" (set
the value of a compton option), together with 4 signals: "win_added",
"win_destroyed", "win_mapped", "win_unmapped".
- D-Bus support depends on libdbus.
- As there are many items and my time is tight, no much tests are done.
Bugs to be expected.
- Create a new header file `common.h` that contains shared content.
- Fix some bugs in timeout handling.
- Update file headers in all source files.
- Re-enable --unredir-if-possible on multi-screen set-ups, as the user
could turn if off manually anyway.
- Check if the window is mapped in `repair_win()`.
- Add ps->track_atom_lst and its handlers, to prepare for the new
condition format.
- Known issue 1: "win_get", "win_set", "opts_get", "opts_set" support a
very limited number of targets only. New ones will be added gradually.
- Known issue 2: Accidental drop of D-Bus connection is not handled.
- Known issue 3: Introspection does not reveal all available methods,
because some methods have unpredictable prototypes. Still hesitating
about what to do...
- Known issue 4: Error handling is not finished yet. Compton does not
always reply with the correct error message (but it does print out the
correct error message, usually).
- Back to using select() for main loop. Thus we are not longer relying
on libevent.
- Add generic timeout system (untested) to prepare for D-Bus support.
- Drop troff man pages. Revise Makefile to improve documentation
building, fix double LDFLAGS inclusion, and re-add -lrt. This turns
asciidoc into a build time dependency.
- Change fading time calculation.
- Add --logpath and ostream_reopen() for debugging with -b.
- Drop unused lceil_ntimes() and other helper functions.
- Only very limited tests are done. Bugs to be expected.
- (Hopefully) fix all incorrect handling of w->a.border_width in compton
(#77). Thanks to baskerville for reporting.
- Attempt to fix#73 by correcting a mistake that window data is fetched
from the wrong function. Thanks to zakkak.
- Add git commit/tag detection to Makefile for automatic versioning.
- Change -lGL linking order, to fix a segmentation fault caused by
something in nvidia-drivers under FreeBSD, mentioned in #74. Thanks
for the report from DachiChang.
- Link to -levent_core instead of -levent in Makefile. We might move to
libev soon, though.
- Increase SWOPTI_TOLERANCE to handle the extraordinary delay of
kqueue() under FreeBSD. Thanks for DachiChang's report.
- Add helper function dump_drawable() for debugging.
- Replace XInternAtom() calls with get_atom().
- Remove -lrt as it's unneeded.
- Use libevent for main loop. I will explain the reasons in #56 later.
The preferred libevent version is 2.x, yet 1.4.x should work as well.
- As a result, compton now should build fine on *BSD. Thanks to
DachiChang for the FreeBSD build issue report.
- Another consequence is we now use microsecond-level timing all the
way. Nanosecond-level code will be dropped soon. Start using long
instead of unsigned long to represent time in milliseconds, as both
can't hold the full epoch time in ms, anyway, and a signed type
requires less care in subtraction. Wrap the epoch time in ms to 15
days.
- Fix broken NO_VSYNC_DRM and NO_VSYNC_OPENGL compile-time options.
- Use git revision number for versioning in Makefile, and other small
improvements.
- Reorganize struct _win. Drop unused w->damaged_sequence. w->damaged is
turned to bool.
- Add type and format to winprop_t, as preparation for the new condition
format.
- Add w->shadow_force and w->focus_force, to prepare for D-Bus support.
- Rename wid_get_prop() to wid_get_prop_adv() with more options. Add
wrapper function wid_get_prop().
- Add some extra helper functions, for D-Bus support later.
- Make some functions return a bool value to indicate if it's
successful.
- Modify add_win(), use a static const structure to initialize the new
struct _win.
- Add some helper macros, like printf_err(f)(q). Make some errors fatal.
- Rename some types, constants, and functions. Code clean-up.
- Check for time disorder in paint_preprocess() when calculating fading
steps.
- Rename evpoll() to swopti_handle_timeout(), and partially rewrite it.
- Make -h / --help legal.
- Known issue: compton segfaults on FreeBSD with nvidia-drivers, unless
NO_VSYNC_OPENGL is used. Will look into it later. Thamls to DachiChang
for reporting.
- Silence a FORTIFY_SOURCE warning. Thanks to @smlx for reporting.
- Add -O2 -D_FORTIFY_SOURCE=2 to default CFLAGS in Makefile.
- Use a cleaner way to resolve the writing-to-freed-memory issue
mentioned in last commit.
Add Asciidoc man pages. The old man page is still kept, and you need to
run "make docs" to generate the new man pages and a HTML version of it.
An Asciidoc man page for compton-trans is not added yet.
- Fix a memory leak in register_cm().
- Print a warning message if argument of --vsync is invalid.
- Known bug: compton will probably freeze X if another compositing
window manager is running and --vsync opengl is enabled, with
nvidia-drivers-304.51. Probably an issue on the driver. I could see no
workaround.
- Add VSync feature. 3 possible VSync methods available: "sw" (software,
not too reliable, but at least you have something to fallback to),
"drm" (using DRM_IOCTL_WAIT_VBLANK, should work only on DRI drivers),
"opengl" (using SGI_swap_control extension OpenGL, might work on more
drivers than the DRM method). "sw" and "opengl" are briefly tested,
"drm" received utterly no test (because I use the nVidia binary blob).
They are enabled with "--vsync sw" / "--vsync drm" / "--vsync opengl".
- Add --refresh-rate to let user specify a refresh rate for software
VSync, in case the automatic refresh rate detection does not work
well.
- Seemingly the automatic refresh rate detection using X RandR in
software VSync detects refresh rate incorrectly. Need further investigation.
- Fix a few bugs in fading timing.
- Add a workaround for client window detection on Fluxbox, as Fluxbox
(incorrectly?) sets the override-redirect flag upon all frame
windows.
- Software VSync adds dependency on librt (a part of glibc) for
nanosecond-level timing functions, and libXrandr for automatic refresh
rate detection; DRM VSync adds dependency on libdrm to use its drm.h,
but does not link to libdrm; OpenGL VSync adds dependency on libGL.
- Print timing information on DEBUG_REPAINT.
- Some WMs don't respect Keith Packard's proposal of
_NET_WM_WINDOW_OPACITY, and do not copy _NET_WM_OPACITY attribute of a
client window to its frame windows, thus cause opacity set by
non-override-redirect windows to have no effect. This commit adds
support for reading _NET_WM_OPACITY from client windows if running
with --detect-client-opacity. Thanks to pvanek for reporting.
- Change Makefile logic to determine options from 3 variables
(NO_LIBCONFIG, NO_REGEX_PCRE, NO_REGEX_PCRE_JIT) instead of CFG to
ensure compatibility when we add new options. CFG variable is no
longer been respected.
- Fix compilation failure with <libpcre-8.20 and <libconfig-1.4. Tested
with libpcre-8.12 and libconfig-1.3.2, but not extensively tested.
libconfig-1.3* probably has more limitations on configuration file
syntax (enforces comma at the end of a setting?) and does not support
@include.
- Make it possible to turn off PCRE and libconfig support using
environment variable "CFG". Not well tested. CMake might provide a
better solution.
- Add support for parsing configuration files using libconfig.
(Dependency on libconfig could be made optional once we get some
better building system.) Few tests has been done, bugs to be expected.
compton searches for a configuration file mostly according to the XDG
standard. Firstly the configuration file requested by --config, then
$XDG_CONFIG_HOME/compton.conf (~/.config/compton.conf, usually), then
~/.compton.conf, then compton.conf under $XDG_DATA_DIRS (often
/etc/xdg/compton.conf). A sample configuration file is supplied as
compton.sample.conf. Configuration file syntax may change in the
future. Commandline switches has higher priority than configuration
file, except for --shadow-exclude. Use --config /dev/null to
temporarily disable configuration file.
- Fix a bug that causes windows to disappear or be partially rendered on
opacity changes.
- Fix a bug that causes some windows to ignore -i (inactive_opacity) and
--inactive-dim, caused by the default window type change in
a5d9955ca4.
- Add shadow blacklist feature, but a different implementation from
nicklan's. 5 matching modes (exact, starts-with, contains, wildcard,
PCRE) and 3 matching targets (window name, window class instance,
window general class). Not extensively tested, bugs to be expected.
It's slower for exact matching than nicklan's as it uses linear search
instead of hash table. Also, PCRE's JIT optimization may cause issues
on PaX kernels.
- Add dependency to libpcre. Could be made optional if we have a
graceful way to handle that in Makefile.
- Some matching functions are GNU extensions of glibc. So this version
may have troubles running on platforms not using glibc.
- Fix a bug that access freed memory blocks in set_fade_callcack() and
check_fade_fin(). valgrind found it out.
- Use WM_CLASS to detect client windows instead of WM_STATE. Some client
windows (like notification windows) have WM_CLASS but not WM_STATE.
- Mark the extents as damaged if shadow state changed in
determine_shadow().
- Rewrite wid_get_name(). Code clean-up.
- Two debugging options: DEBUG_WINDATA and DEBUG_WINMATCH.
- As the matching system is ready, it should be rather easy to add other
kinds of blacklists, like fading blacklist.
More descriptions on issue #36.
- Listens ShapeNotify event to get around the Chromium window painting
issues.
- Adds dependency on X Shape extension.
- Adds a few functions for convenience, so a bit code clean up.
- Better event debug support, adds restack_win() debug.